China Different Range D/M Type CNG Natural Gas Compressor Factory

Product Description

Features and Advantages:

Reciprocating Gas Compressor are widely used in many industries related to the compression and supply of gas to consumers. Like oil and chemical industry, oil refineries and more. Various technological processes can include corrosive, inert, poisonous and explosive gases, which must be treated to a clean gas without impurities of oil.

Depending on the type of equipment, work with different gases, such as:

Natural gas
Nitrogen
Hydrogen
Associated petroleum gas (APG)
Helium
Methane
Ethane
Propane
Chlorine
Propylene
Argon
Various types of butane
Carbon dioxide, etc.

Compressor units can be made on single frame design. With interstage devices and all necessary piping, placed on a single platform with a compressor.

Compressor units can be manufactured in the version “without lubrication of cylinders and oil seals”;

The modern automation system of the compressor units guarantees the safety and easy use of the equipment.

Reducing the time of commissioning.

Product Characteristics:

Rigid bed

DENAIR compressor frames are designed for long service life and ease of maintenance. Our antiques have a base made of ductile iron with massive stiffeners and a lightweight removable aluminum top cover.

 

Durable crossheads

One-piece durable crossheads with ground hardened steel pins, pressure lubricated top and bottom sliding surfaces for maximum wear.  

 

High strength connecting rods

The compressors are characterized by the use of durable ductile iron connecting rods with a four-bolt cover attached to the high-strength I-beam body.

 

Innovative cylinders

DENAIR’s proven cylinder design eliminates the cost of a cylinder cooling system, eliminates complexities and eliminates the potential for maintenance problems. Associated with water cooling such as scale and corrosion.

 

Horizontal, ion-nitrided compressor cylinders, single or double acting, no water cooling

Gauge connection points on the cylinder cover side and the crankshaft side

Ion nitrided SAE 4100 series piston rods with rolled threads

Pistons made of wear resistant gray or ductile iron

Non-metallic piston and backup rings

Floating, vented stem seals and valve stem seals

Non-metallic plates in suction and discharge valves

 

Gas Compression Products:

DENAIR is committed to delivering integrated compression solutions tailored to our customers’ specific requirements. We offer all series of compressors with electric motor or gas engine to ensure safe and reliable operation.

DENAIR’s packaged units can be used both onshore and offshore with a range from 85 HP to 10,000 HP.

Extensive application experience from oil and gas fields to chemical plants gives CZPT a deep understanding of customer needs as well as industry standards in different countries and regions. In addition, we can also provide engineering services for gas collection station, gas supply and underground gas storage facilities, etc.

Ambient temperature: -140 F – 122 F (-60 C – +50 C)

Pressure range: 0 – 8990 psi (0 – 61.98 MPa)

Power range: 10 HP – 10000 hp (7.46 – 7457 kW)

Process gas: natural gas, air, hydrogen, ethane, nitrogen, propane, CO2, BOG, etc.

Mounting types: automotive, stationary, mobile and pile mounting

Application: injection, collection, utilization of associated gas, injection of fuel gas, CNG, etc.

DENAIR Piston Gas Compressor Customer Case

You Can Find Our Reciprocation Gas Compressors In Most Industries

DENAIR Factory

At DENAIR, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CZPT has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us. 

DENAIR Piston Gas Compressor Production Flow & Packakaging & Shipping

FAQ

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang  201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Different Range D/M Type CNG Natural Gas Compressor Factory  China Different Range D/M Type CNG Natural Gas Compressor Factory

Recent Posts